1. Conventional Fire Alarm Bell AW-CBL2166-6/8

Description:
Technical Specification The fire alarm bells combine styling and functional efficiency. They incorporate a low power rotary centrifugal mechanism, which gives a high sound output with low current consumption at 24VDC. The bells are available in 2 sizes; 6″ (150mm) and 8″ (200mm). These sizes suit a wide variety of installations.
Technical Specification:
Model AW-CBL2166-6 Diameter Working voltage Work current @24VDC Volume(dB) @1m Dimensions Net Weight 6″(150mm) 20VDC to 28VDC ≤50mA ≥98dB 150mm150mm60mm 600g AW-CBL2166-8 8″(200mm) 20VDC to 28VDC ≤50mA ≥100dB 200mm200mm67.5mm
2. Conventional Photo-electronic Smoke Detector AW-CSD381

Asenware AW-CSD381 adalah perangkat detektor asap konvensional berbasis optik (photo-electronic/photoelectric smoke detector) yang dirancang untuk mendeteksi indikasi awal kebakaran melalui partikel asap di udara.
Features
Surfacemounting LEDindicator Complete functional test with everyactivation Meetsall requirementsof latest EN54-7:2018
3. Horn Strobe AW-CSS2166-2

The Asenware AW-CSS2166-2 is a conventional fire alarm horn strobe designed for indoor visual and audible emergency notifications.
Technical Specifications
- Operating Voltage: 12VDC – 24VDC (or Zone 24V)
- Operating Current: ≤50mA – 60mA @ 24VDC
- Sound Pressure Level (SPL): ≥85dB – 100dB @ 1 meter (depending on configuration)
- Flash Period: ≤1.0 second (1 time/sec)
- Sound Types: Fire mode and T3 mode options
- Protection Class: IP30 (Indoor use only)
- Operating Temperature: -10°C to 50°C (14°F to 122°F)
- Material & Color: Red ABS housing
- Dimensions & Weight: 154mm × 115mm × 50.5mm; approximately 165g
- Compatible Control Panel: Mated primarily with the Asenware AW-CFP2166 conventional fire alarm control panel.
4. Isolator Module

An Isolator Module (often called a fault isolator or line isolator) is a specialized safety and protective device used primarily in addressable fire alarm systems and electronics/signal circuits to prevent total system failure during a short circuit.
5. AW-D116 Addressable Annunciator

The Asenware AW-D116 is an addressable fire alarm annunciator (repeater panel) designed to work alongside the Asenware AW-FP100 Series Addressable Fire Alarm Control Panel. It mirrors system events and allows remote monitoring and basic control of the fire alarm network
6. AddressableI /O Module AW-D119

The Asenware AW-D119 is an addressable input/output (I/O) module designed for indoor use with Asenware addressable fire alarm control panels (such as the AW-FP100, AW-FP200, and AW-FP128 series)
7. Conventional Manual Call Point AW-D135C

The Asenware AW-D135C is a non-addressable conventional manual call point (MCP) used to initiate fire alarm signals in commercial or industrial safety setups
8. AW-FP200 Address able Fire Alarm Control Panel

The Asenware AW-FP200 (Mutil-8) is an addressable fire alarm control panel featuring a hybrid wired-and-wireless two-wire design
